The final stage of the All-Russian Olympiad for schoolchildren in technology. Assignments for conducting a school technology Olympiad
in technology (technical work) 5th grade
Theoretical part, maximum number of points 20
Exercise 1. The pattern on the surface of wood is called: |
A. Structure b. Invoice c. Texture of the city Cambium |
Task2. |
Task 3 . How to find out the age of a tree: A. Along the bark b. By texture c. By tree rings By number of branches |
Task 4. The following does not apply to hardwood: |
A. Birch b. Cypress c. Alder Larch |
Task 5. Basic equipment of a student’s workplace in a carpentry workshop: A. Carpentry workbench b. Tool set c. Set of materials |
Task 6. In what direction are the saw teeth on a jigsaw? |
A. Towards the top clamp (up) c. Doesn't matter B. Towards the handle (down) d. Towards the frame |
Task 7. What units of measurement are used to put dimensions on drawings? A. in meters b. in millimeters g. in centimeters |
Task 8. A visual three-dimensional image of an object, made by hand indicating the dimensions and material, is called: |
A. Sketch b. Technical drawing c. Drawing by Mr. Development |
Task 9. At what scale is the image enlarged? |
A. M 1:1 b. M 2:2 c. M 1:2 g. M 2:1 |
Task 10 . Wood is harvested: A. Forestry b. Wood industry V. Forestry enterprises, Chain saws |
Task 11. Select the answer that lists only softwood species A. Pine, spruce, fir, larch, cedar b. Spruce, aspen, pine, larch, oak V. Cedar, poplar, larch, ash, pine |
Task 12. An auxiliary tool for finishing wood parts is called: |
A. Rasp b. Scraper c. Sanding paper from Planok |
Task 13. What material are products made from in a carpentry workshop? A. Made of metal b. From wood in. Made of wood and metal |
Task 14. The marking tool does not include: A. Compass b. Scribbler v. Square Chisel Task 15. An auxiliary tool for fixing the workpiece when sawing? A. Anvil b. Correct plate c. Workbench in Vise Task 16. What is the name of the piece of wood from which the parts are made? A. Material b. Preparation c. Wood Task 17. What is a template? A. Sketch of part b. Part drawing c. A plate whose outline matches the contour of the part Task 18. Task 19. Varnishing of wooden products is carried out: A. To create wood texture B. To protect surfaces from moisture and rotting B. For coating with stains D. To give a decorative look Task 20. The creative project begins A. From determining the needs and opportunities of project activities B. From collecting information to complete the project B. From the manufacture of products D. From choosing a project topic Thread the jigsaw; Make markings on plywood |
Preview:
Exercise 1. In the subject "Technology" the following are studied:
A . technologies for the production of household appliances;
b. computer technologies;
V. technologies for creating airplanes and helicopters;
G . technologies for converting materials, energy, information
Task 2. Damage to wood in the form of holes gnawed by larvae and beetles?
A. Rot b. Cracks in. Cancer Wormhole
Task 3. Plywood is made by:
A. Pressing and gluing crushed wood in the form of shavings, sawdust, wood dust
b. Pressing in the form of sheets of wood pulp steamed and crushed to individual fibers
V. Gluing three (or more) thin sheets of wood onto each other
d. Sawing logs into thin plates
Task 4. . What is the name of the document that indicates the sequence of operations?
A. Technological map c. Technical certificate
B. Technical passport d. Technical drawing
Task 5. An image of a product drawn using drawing tools indicating its dimensions, name, scale and material is called:
A. Sketch b. Technical drawing by Drawing by Razvyortka
Task 6. What are mechanical damage to wood during harvesting, transportation and processing called?
A. Cracks b. Knots in. Defects
Task 7. What material will you use when cutting with a jigsaw:
A. Log b. Metal plate c. Plywood Wooden block
Task 8. What type of operation is the main one when working on a lathe?
a.Turning b. Drawing in. Scraping g. Torsion
Task 9. The type of artistic metal processing is:
A. Burning b. Minting c. Soldering Drilling
Task 10. What tool is used to mark circles?
A. Compass b. Reismus v. Square
Task 11. The project begins:
A. from drawing up a general action plan
b. from the development of technological documentation
product manufacturing
d. from putting forward the idea of project implementation
Task 12. Find the symbol for an incandescent lamp
Task 13. Find electric current insulators:
A. Water, man, metal, humid air. Glass, damp wood, fabric
b. Paper, rubber, plastic Clay, porcelain, dry air
Task 14. What property of a material contributes to its resistance to the penetration of another, harder material?
A. Elasticity b. Hardness c. Malleability d. Fluidity
Task 15 . The property of metals to combine in a plastic or molten state is called...
A. Malleability b. Elasticity c. Weldability d. Flowability
Task 16. Arrange the letters a B C D E according to the names of lumber
Gorbyl |
|
timber |
|
Unedged board |
|
Edged board |
|
Bar |
Task 17. Steel is an alloy...
A. Iron with silicon b. Iron with oxygen c. Iron with nitrogen g. Iron with carbon
Task 18. Tool for thin metal sheet - foil:
a. Wire cutters b. Scissors in. Pliers, Round nose pliers
Task 19 . There is no stage in the implementation of a creative project:
A. Preparatory b. Technological in. Final city Finishny
Task 20. What does the technological stage of performing design work include?
A. Execution of technological documentation
b. Compliance with safety conditions and work culture
V. Product control
d. Selection of materials and tools
Practical part, number of points 20:
- thread the jigsaw,
Cut out the part according to the template
Preview:
Tasks of the school stage of the All-Russian Olympiad for schoolchildren
in technology (technical work) 7th grade
Theoretical part, maximum 20 points
Exercise 1. Within the framework of the subject "Technology" the following are studied:
A. Furniture production technologies
B. Technologies for creating medical instruments
B. Aircraft technologies
D. Technologies for converting materials, energy, information
Task 2. From the examples given, the product is:
A. Book shelf b. Apple in. Wood d. Technological process
Task 3. Technological machines include:
A. Bicycle b. Car in. Escalator Drilling machine
Task 4. Information about the product manufacturing process is given:
A. In the technological map c. Details on the drawing
B. On a technical drawing d. On an assembly drawing
Task 5. The mechanical properties of wood are:
A. Hardness b. Density c. Color g. Fluidity
Task 6. In the sequence of product creation, the last item should be
A. preliminary design of the product b. choosing the best option
B. production of a prototype d. prototyping
Task 7. What is not included in the search and research stage of a creative project?
A. Choosing a project topic b. Collecting information on the project topic
B. Manufacturing the product. D. Selecting the best idea and researching it.
Task 8. Which picture shows the correct marking?
Task 9. An alloy of iron and carbon (content up to 2%) is called:
A. Bronze b. Brass c. Steel Cast iron
Task 10. Complex substances obtained by combining one metal with other metals or non-metallic compounds are called………….
Task 11. Project execution begins
A. From choosing a project topic
b. From product manufacturing
V. From identifying the needs and opportunities of project activities
D. From collecting information for project implementation
Task 12 What is the name of a visual three-dimensional image of a part, made by hand, indicating the dimensions and scale?
A. sketch b. drawing c. technical drawing
Task 13. At what scale is the image reduced?
A. M 1:1 b. M 1:4 c. M 1:2 g. M 2:1
Task 14. What is the length of the product whose sketch is given?
A. 60 mm b. 260 mm h. 200 mm g. 267 mm
Task 15 . The project ends:
A. Manufacture of the product b. Preparation of the project description
V. Assessment and self-assessment of the project. Protection of the project
Task 16. Voltage is safe
A. 380 V b. 220 V. 12 V 36 V
Task 17. Find the plug symbol
Task 18. What is the name of element number 3? |
||
A. Electrodes b. Basement c. Filament d. Glass bulb Task 19. Find an electrical circuit with a parallel connection: |
||
Task 20. Which electrical circuit will work? |
||
Practical task, number of points 20: Assemble a simple electrical circuit |
||
Preview:
Tasks of the school stage of the All-Russian Olympiad for schoolchildren
8-9 grade
Question No. 1 The center for artistic wood processing is:
A) Gzhel; b) Kubachi; c) Khokhloma; d) Dymkovo.
Question No. 2 A number of countries around the world are moving away from using plastic packaging.
Because:
A) paper packaging is cheaper; b) there are problems with disposal;
IN) plastic packaging poisons food; d) plastic packaging is expensive
Question No. 3 Non-ferrous alloys include:
A) cast iron b) iron c) steel d) brass
Question #4 Why, when joining joinery with several nails, they are placed
In checkerboard order:
A) so that the product looks aesthetically pleasing; c) so that the part does not crack;
B) to make the connection stronger; d) to save nails
Question No. 5 The threaded connection may include
A) screw B) bolt C) self-tapping screw D) nut
Question No. 6 Tool to measure hole size with 0.1mm tolerance:
a) roulette; b) scale bar; c) micrometer; d) caliper
Question No. 7 The wire is made in the following way:
A) forging; b) pressing, c) drawing; d) stamping;
Question No. 8 What dimensional characteristics express linear dimensions on
Mechanical engineering drawings?
A) m b) mm c) cm
Question No. 9 The family budget is:
A) the sum of all family income c) family income and expenditure plan
B) the total wages of family members d) the sum of all family expenses
Question No. 10 The way to create a mosaic on wood is:
A) waxing b) burning c) carving d) inlay.
Question No. 11 Before choosing the optimal idea for project implementation, it is necessary:
A) collect information about possible ways to implement the project
B) collect equipment and materials to complete the product
B) write an explanatory note
D) draw up a technological map for the manufacture of the product
Question No. 12 The project ends:
A) manufacturing of the product; C) presentation (defense) of the project;
B) preparation of a project description; D) evaluation and self-assessment of the project.
Question No. 13 Which machine is designed for processing cylindrical surfaces of parts:
A) drilling b) milling
C) turning d) CNC milling
Question No. 14 Determine which projections correspond to the model shown on the left in
Visual image.
A B C)
Question No. 15 What types of connections are threaded connections?
A) to movable B) to movable and one-piece C) to fixed and detachable
Question No. 16 What mechanism is used to convert reciprocating
Movements in rotation:
A) rack and pinion b) rocker c) crank d) screw
Question No. 17 Duralumin is an alloy of aluminum with....
a) copper; b) carbon; c) iron; d) tin; e) silicon.
Question No. 18 Knowledge of a person’s character and temperament is necessary when
The choice of his professional activity.
Select the correct characteristics for each of the indicated types of temperament.
Temperament types | Characteristic |
1. choleric | a) a slow, imperturbable person, with a weak external manifestation of mental states |
2. sanguine | b) a fast, impetuous, unbalanced person, prone to sudden mood swings |
3. phlegmatic | c) a person who is easily vulnerable, deeply experiences even minor failures, is often sad, and outwardly reacts sluggishly to his surroundings |
4. melancholic | d) a person who is lively, active, quickly responds to surrounding events, and experiences failures and troubles relatively easily |
Answer: 1 - ….., 2 - …….., 3 - ………, 4 - ……….
Question No. 19 For cutting metals it is used:
a) drill b) hacksaw c) chisel d) needle file
Question No. 20 A type of artistic metal processing is
A) minting; B) drilling; B) turning; D) sawing.
- Make a box for small items from tin (20 points)
- Make a tenon connection (20 points)
Preview:
Tasks of the school stage of the All-Russian Olympiad for schoolchildren
in technology (technique and technical creativity)
10-11 grade 2015-2016 academic year
One point is awarded for each task
Question No. 1 This French word entered the Russian language in the 30-40s of the 19th century as a competitor to the word field . Today we associate with this concept a person’s active achievement of success in his professional activities. What is this word? ……………………………..
Question No. 2 Technology is
A) the science of social processes
B) the science of physical processes
B) the science of chemical processes
D) the science of transformations of materials, energy and information
Question No. 3 What type of wood materials are obtained by planing
thin layer of wood?
a) plywood b) particle board (chipboard) c) unedged board d) veneer
Question No. 4 An increase in the hardness of the workpiece surface is ensured by heat treatment: A) annealing B) hardening C) tempering
Question No. 5 . When the key is closed in a circuit containing three lamps, lamp L2 will:
a) burn brighter
b) will go out
c) will burn without changes
d) will burn less brightly.
Question No. 6
Technical documentation:
A) rules and regulations b) rules c) standard
Question No. 7 . Correct dimensions:
A B C
Question No. 8 The interdisciplinary field of fundamental and applied science and technology, dealing with a set of theoretical justification, practical methods of research, analysis and synthesis, as well as methods for the production and use of products with a given atomic structure through controlled manipulation of individual atoms and molecules, is called
- Electronics b) Nanotechnology c) Biotechnology d) Space technology
Question No. 9 What is the name of the tool for cutting external threads?
A) tap b) die c) cutter
Question No. 10 The main part of the lathe is:
- lead screw b) vertical feed flywheel
c) handle for switching spindle rotation speeds d) feed box
Question No. 11 Mechanical properties of metal:
- soldering b) hardness c) fluidity d) density
Question No. 12 To protect roofing iron from corrosion, use:
- nickel plating b) lead c) chrome plating d) galvanizing
Question No. 13 A document establishing uniform rules for the design of graphic and
Technical documentation:
A) rules and regulations B) rules C) standard D) norms
Question No. 14 The type of artistic wood processing is:
A) drilling b) sawing c) planing d) burning
Question No. 15 Use of wood as a structural material in construction
In our country it is determined:
A) the presence of large natural resources; b) ease of processing;
c) water resistance; d) fire resistance.
Question No. 16 The electromagnetic effect of electric current is used in:
A) incandescent lamps b) heating devices
C) fuses d) electric motors
Question No. 17 Carpentry tools for drilling deep holes:
A) drill b) drill c) countersink d) milling cutter
Question No. 18 Deviations in the size and shape of the product, in which their
performance is called...
A) accuracy b) fit c) roughness d) tolerance.
Question No. 19 Technological process, the essence of which is to fill out a form
Materials are called…
A) soldering b) cutting c) planing d) casting e) heat treatment
Question No. 20. How should a plane be laid on a workbench?
a) sole on a workbench; b) on the side with the blade facing away from you; c) on the side with the blade facing you; d) on the side.
Practical work (40 points)
- Select a project topic. Provide justification for the relevance of the chosen topic (20 points)
- Create a technological sequence for the project (20 points) G
- A, B
School Olympiad in “Technology. Service work" in the 6th grade is carried out in stage II: testing (testing theoretical knowledge) and a practical task. Test tasks have been prepared for all main sections of the subject “Technology” in accordance with the educational standard of the Russian Federation for students of basic general education, practical work corresponds to the list of required skills. The Olympiad takes place over one day, duration 1 hour 40 minutes.
Progress of the event
I round
The test consists of 25 test items. In the test, tasks of the same type are combined under common instructions for their implementation.
When performing tasks with the wording "Choose one correct answer", you must select one the correct answer from the given answer options.
"Fill in the missing word" you need to insert a word.
When performing a task with the wording "Set up the correct sequence" it is necessary to arrange the proposed positions in the required sequence.
Each correct answer to a question is worth 1 point. The maximum score for the theoretical round is 25 points.
The test time is 40 minutes.
If the test is completed incorrectly or only partially - zero points. You should not expect to receive half a point on a test that is half completed. The accuracy and awareness of the answers are taken into account.
2nd round
Completing a practical task
in the section "Decorative and applied arts"
Evaluated:
- correct sequence of work;
- quality of product manufacturing;
- compliance of the product with the drawing;
- compliance with labor safety rules and rational organization of the workplace.
Criteria for evaluation:
- Proper organization of the workplace
- The quality of transferring the design to the fabric
- Quality of embroidery
- Same stitch length
- Seam compliance with the specified
- Color solution
- WTO quality
- Compliance with safety regulations
The duration of the practical task is 1 hour.
The maximum score for completing a practical task is 25 points.
An introductory briefing is provided before each task begins.
GENERAL EVALUATION CRITERIA competition tasks of the school Olympiad in the educational field “Technology. Service labor"
The Olympics consists of 2 stages:
- testing;
- performing a practical task.
The total maximum amount of points that a competitor can score is 50.
This amount is distributed in the following amounts according to the stages of the competition:
- testing (testing theoretical knowledge) – 25 points;
- performing a practical task. – 25 points.
Stage I – testing (testing theoretical knowledge) – 25 points.
There are 25 questions with one correct answer. Each correct answer is worth 1 point.
Stage II – completing a practical task – 25 points.
Summarizing: the participant who scores the maximum number of points (more than 50%) is the winner of this round of the Olympiad. Prize-winners of the school stage (2nd place, 3rd place) are recognized as participants who follow the winner in the final table if their scores are more than half the maximum possible (50% of the maximum possible 50 points scored in two stages of the school Olympiad).
TEST TASKS FOR THE SCHOOL STAGE OF THE ALL-RUSSIAN OLYMPIAD FOR SCHOOLCHILDREN IN TECHNOLOGY “CULTURE OF HOME AND DECORATIVE AND APPLIED ARTS” 6th grade
In the answer form, mark the correct answers, words and sentences with a “+” sign.
Choose one correct answer (for tasks 1–23)
TECHNOLOGY IS SCIENCE
a) studying natural phenomena;
b) studying historical events;
c) studying the basics of economics;
d) studying the transformation of materials, energy and information.
PROJECT EXECUTION BEGINS
a) from choosing the optimal idea for project implementation;
b) from the development of the product design;
c) from the development of product manufacturing technology;
d) from defining the problem and topic of the project.
TEXTILE FIBERS ARE DIVIDED INTO NATURAL AND
a) vegetable;
b) mineral;
c) chemical.
SHARP THREAD WHEN STEPPED:
a) changes its length;
b) does not change its length.
THE PROCESS OF OBTAINING FABRIC FROM THREADS BY WEAVING THEM IS CALLED:
a) spinning;
b) weaving;
c) finishing.
THE PATTERN ON THE FABRIC IS WEAKLY VISIBLE
a) with a printed design;
b) pile.
WHAT ARE RAW MATERIALS FOR FABRIC PRODUCTION
a) cotton wool;
b) yarn;
c) trust.
AT THE EDGES OF THE FABRIC DURING ITS MANUFACTURE, THERE ARE FORMED
a) fringe;
b) border;
c) edges.
FIGURE MEASUREMENT RESULTS ARE NOT DIVIDED IN HALVES
a) length measurements;
b) width measurements;
c) girth measurements.
WHAT CAN CHANGE USING SIMULATION
a) product size;
b) product style;
c) color of the product.
MEASUREMENT SAT IS TAKEN:
a) to determine the length of the belt;
b) to determine the length of the product;
c) to determine the width of the product.
FOR THE GROWTH OF BONES AND TEETH, THE BODY NEEDS A MICROELEMENT
a) iodine;
b) potassium;
c) calcium;
d) magnesium
DOES NOT APPLY TO THERMAL TREATMENT OF PRODUCTS
a) cooking;
b) drying;
c) frying.
AN ELECTRIC APPLIANCE FOR Toasting OR DRYING SLICES OF BREAD IS CALLED
a) deep fryer;
b) mixer;
c) toaster.
CUTLERY DOES NOT APPLY TO:
a) spoon;
b) colander;
c) fork;
d) knife.
THE DURATION OF COOKING EGGS “IN A BAG” IS:
a) 2 minutes
b) 4-5 minutes
c) 8-10 minutes
WHEN OPERATING AN ELECTRICALLY DRIVEN SEWING MACHINE, FIRST YOU SHOULD CHECK
a) integrity of the power cord;
b) the correctness of the material chosen for the work;
c) availability of material;
d) presence of backlight
CONNECTING JOINTS DO NOT APPLY TO:
a) stationary;
b) adjustment;
c) invoice;
d) hem with a closed cut.
THE WORKING TOOL OF THE SEWING MACHINE IS
a) knitting needle;
b) needle;
c) hoop.
THE ENDS OF THE LINES ON THE SEWING MACHINE ARE SECURED
a) double reverse stitching;
b) a knot;
c) a loop.
THE EMBROIDERY DESIGN IS TRANSLATED ONTO FABRIC USING
a) felt-tip pen;
b) copy stitches;
c) carbon paper.
AN IMPORTANT ASPECT WHEN MANUFACTURING PRODUCTS FROM FLAP IS
a) color scheme;
b) price of fabric;
c) product size.
THE THREAD USED IN EMBROIDERY IS CALLED
a) nylon;
b) floss;
c) nylon.
Fill in the missing word MEASUREMENTS ARE TAKEN FROM THE _______________ SIDE OF THE FIGURE.
INDICATING IN NUMBERS THE SEQUENCE OF PRIMARY PROCESSING OF VEGETABLES:
a) cleaning;
b) washing;
c) slicing;
d) washing;
d) sorting.
Answers FOR TEST TASKS OF THE SCHOOL STAGE OF THE ALL-RUSSIAN OLYMPIAD FOR SCHOOLCHILDREN IN TECHNOLOGY “CULTURE OF HOME AND DECORATIVE AND APPLIED ARTS” 6th grade
For each correct answer, the participant receives one point. If the answer is completed incorrectly or only partially - zero points. You should not give half a mark for an answer that is half completed.
The wording of free answers to test questions and assignments does not have to exactly match the answer attached to the assignment. Here, the correctness of the answer should be assessed by its general meaning and by keywords.
1 | G |
2 | G |
3 | IN |
4 | B |
5 | B |
6 | A |
7 | A |
8 | G |
9 | A |
10 | B |
11 | IN |
12 | IN |
13 | B |
14 | IN |
15 | B |
16 | B |
17 | A |
18 | G |
19 | B |
20 | A |
21 | IN |
22 | A |
23 | B |
24 | RIGHT |
25 | 1 – d, 2 – b, 3 – a, 4 – d, 5 – c. |
PRACTICAL TASK FOR THE SCHOOL STAGE OF THE ALL-RUSSIAN OLYMPIAD FOR SCHOOLCHILDREN IN TECHNOLOGY “CULTURE OF HOME AND DECORATIVE AND APPLIED ARTS” 6th grade
Exercise: make make a decorative napkin.
Source materials– plain-dyed cotton fabric, floss threads in two or three colors, copy paper, pencil:
Cut sizes: main part (1 piece) - 15 x 15 cm.
Tools and equipment: embroidery needle, pins, scissors, iron.
Map of operational control of practical work "Making a decorative napkin"
No. | Technological operations | Points |
1. | Proper organization of the workplace | 1 |
2. | The quality of transferring the design to the fabric | 3 |
3. | Quality of embroidery | 5 |
4. | Same stitch length | 3 |
5. | Seam compliance with the specified | 5 |
6. | Color solution | 3 |
7. | WTO quality | 3 |
8 | Compliance with safety regulations | 2 |
Total | 25 |
Literature
- Technology: Maintenance labor. Tests. 5-7 grades / Markutskaya S.E. – M.: Publishing house “Exam”, 2006. – 128 p. (Series “Training and Methodological Kit”)
- Khotuntsev Yu.L., Kozhina O.A. Methodological recommendations for developing tasks for the school and municipal stages of the All-Russian Olympiad for schoolchildren in technology in the 2010/2011 academic year.
XXI century technology
Technology is a school discipline that provides students with the skills necessary for everyday life. As a rule, boys and girls are divided into two groups: the first study the culture of the home, the second study technology and technical creativity. Over the years, lessons within this discipline have evolved significantly. Today, educational institutions keep up with the times, and instead of creating stools and aprons, children study robotics and design, gain knowledge in the fields of physics, drawing and computer science, learn to make decorative elements for dishes, sew complex dresses, and even organize real fashion shows. Each of them has the opportunity to compete with each other in these skills by participating in the All-Russian Olympiad for Schoolchildren in Technology.
Technology Olympics
Today, the Technology Olympiad is a unique competition where every child can try their hand at it. There are three nominations for the Olympiad: “Technology and technical creativity”, “Home culture” and “Robotics”. Both boys and girls can try themselves in each category.
Dear winners and prize-winners of the regional stage of the All-Russian Olympiad for schoolchildren in technology in the 2018-2019 academic year
The award ceremony will take place
on the Small Stage of the Anichkov Palace
at Nevsky Prospekt, 39
The beginning of the Ceremony is at 16:00
Registration starts at 15:30
Have with you:
passport or student ID with photo, replacement shoes/shoe covers.
Website of the All-Russian Olympiad for schoolchildren - http://www.rosolymp.ru/
Methodological website of the All-Russian Olympiad for schoolchildren - http://olymp.apkpro.ru/
The All-Russian Olympiad for schoolchildren in technology is held in four stages: school, municipal, regional, and final. Each stage includes three rounds: testing, practical work, and defense of creative projects.
The Olympiad is held in two categories: “Technology and technical creativity”, “Home culture and arts and crafts”.
1. The first competition should be theoretical (tests and questions).
2. The second competition is the practical round, it is required at all stages of the Olympiad.
3. The third competition of the Technology Olympiad is the presentation of a project independently completed by the student.
Since 2016, the Ministry of Education of the Russian Federation has recommended that students’ project activities be divided into several areas.
Nomination “Technology and technical creativity”
1. Electrical engineering, automation, radio electronics. (Including the design of systems similar to the “Smart Home” concept, the design of feedback systems, the design of electrified objects, the use of automatic control systems for devices for domestic and industrial use.)
2. Robotics, robotic devices, systems and complexes. (Robotic devices that are functionally suitable for performing technological operations, robotic systems that allow analyzing the parameters of a technological process and optimizing technological operations and processes, robotic systems that simulate or implement a technological process).
3. Technical modeling and design of technical and technological objects.
4. Artistic processing of materials (wood carving, artistic forging, burning, and others).
5. Design of agricultural technologies (design areas - crop production, livestock farming), modern design (phytodesign and others).
6. Socially oriented projects (ecological, bionic modeling; agrotechnical: landscape and park design, floristry, mosaic and others with the application of art objects).
7. Design of objects using modern technologies (3-D technologies, CNC milling machines and others), design of new materials with specified properties and objects made of new materials.
Nomination “Home Culture and Decoration”- applied creativity»
1. Design and production of garments, modern technologies, fashion.
3. Interior items, modern design (phytodesign, plant growing, agricultural technologies).
4. Socially oriented projects (ecological; agrotechnical: landscape and park design, floristry, mosaic and others with the addition of art objects).
5. National costume and theatrical costume.
6. Design of objects using modern technologies (3-D technologies, use of CNC equipment, laser processing of materials and others), design of new materials with specified properties.
REGIONAL STAGE
REGULATIONS
News
Regional stage of the All-Russian Olympiad for schoolchildren in technology
Preliminary results of the regional stage of the All-Russian Olympiad for schoolchildren in technology 2019
Nomination "Home culture and arts and crafts"
Nomination "Technology and technical creativity"
The display of works and the appeal will take place on February 6, 2019 at 16:00 at the site.
The regional stage of the All-Russian Olympiad took place on January 30 and 31, 2019 in GBOU secondary school No. 5 of the Vasileostrovsky district of St. Petersburg at the address: St. Petersburg, 13-line V.O., building 28.
Registration starts at 08:30.
The Olympiad starts on January 30 at 09:00 (theoretical round). January 31, registration of participants 15 minutes before the start of the practical tour
nomination “Home Culture and Arts and Crafts” and "Technology and technical creativity"
For grades 10-11 - 80 points; for 9th grade -100 points
List of participants in grades 8 - 9 invited to the regional stage of the Olympiad
List of participants in grades 10-11 invited to the regional stage of the Olympiad
If you find yourself on the list, then register
Documents for participation in the regional stage:
- Identity document (passport);;
- Writing instruments (blue or black pen), non-programmable calculator;
- To perform practical work in the category “Technology and Technical Creativity” in the woodworking and metalworking sections, it is MANDATORY to have a work uniform (robe and headdress)
- Replacement shoes/shoe covers.
The regional stage of the All-Russian Olympiad for schoolchildren in technology took place on February 14 and 15, 2018
Passing score for participation in the regional stage:
Documents for participation in the regional stage:
- Identity document (passport);
- Photocopy of passport (with registration);
- Certificate from the institution where the participant is currently studying;
- Writing instruments (blue or black pen);
- Replacement shoes/shoe covers.
The first round of the regional stage of the VSOSH on technology took place on November 30, 2017. The second round is from November 30 to December 3. For detailed information about the points scored, the date and place of the appeal, check in your area with the methodologist responsible for holding the Technology Olympiad.
School Olympiad in “Technology. Service work" in the 6th grade is carried out in stage II: testing (testing theoretical knowledge) and a practical task. Test tasks have been prepared for all main sections of the subject “Technology” in accordance with the educational standard of the Russian Federation for students of basic general education, practical work corresponds to the list of required skills. The Olympiad takes place over one day, duration 1 hour 40 minutes.
Progress of the event
I round
The test consists of 25 test items. In the test, tasks of the same type are combined under common instructions for their implementation.
When performing tasks with the wording "Choose one correct answer", you must select one the correct answer from the given answer options.
"Fill in the missing word" you need to insert a word.
When performing a task with the wording "Set up the correct sequence" it is necessary to arrange the proposed positions in the required sequence.
Each correct answer to a question is worth 1 point. The maximum score for the theoretical round is 25 points.
The test time is 40 minutes.
If the test is completed incorrectly or only partially - zero points. You should not expect to receive half a point on a test that is half completed. The accuracy and awareness of the answers are taken into account.
2nd round
Completing a practical task
in the section "Decorative and applied arts"
Evaluated:
- correct sequence of work;
- quality of product manufacturing;
- compliance of the product with the drawing;
- compliance with labor safety rules and rational organization of the workplace.
Criteria for evaluation:
- Proper organization of the workplace
- The quality of transferring the design to the fabric
- Quality of embroidery
- Same stitch length
- Seam compliance with the specified
- Color solution
- WTO quality
- Compliance with safety regulations
The duration of the practical task is 1 hour.
The maximum score for completing a practical task is 25 points.
An introductory briefing is provided before each task begins.
GENERAL EVALUATION CRITERIA competition tasks of the school Olympiad in the educational field “Technology. Service labor"
The Olympics consists of 2 stages:
- testing;
- performing a practical task.
The total maximum amount of points that a competitor can score is 50.
This amount is distributed in the following amounts according to the stages of the competition:
- testing (testing theoretical knowledge) – 25 points;
- performing a practical task. – 25 points.
Stage I – testing (testing theoretical knowledge) – 25 points.
There are 25 questions with one correct answer. Each correct answer is worth 1 point.
Stage II – completing a practical task – 25 points.
Summarizing: the participant who scores the maximum number of points (more than 50%) is the winner of this round of the Olympiad. Prize-winners of the school stage (2nd place, 3rd place) are recognized as participants who follow the winner in the final table if their scores are more than half the maximum possible (50% of the maximum possible 50 points scored in two stages of the school Olympiad).
TEST TASKS FOR THE SCHOOL STAGE OF THE ALL-RUSSIAN OLYMPIAD FOR SCHOOLCHILDREN IN TECHNOLOGY “CULTURE OF HOME AND DECORATIVE AND APPLIED ARTS” 6th grade
In the answer form, mark the correct answers, words and sentences with a “+” sign.
Choose one correct answer (for tasks 1–23)
TECHNOLOGY IS SCIENCE
a) studying natural phenomena;
b) studying historical events;
c) studying the basics of economics;
d) studying the transformation of materials, energy and information.
PROJECT EXECUTION BEGINS
a) from choosing the optimal idea for project implementation;
b) from the development of the product design;
c) from the development of product manufacturing technology;
d) from defining the problem and topic of the project.
TEXTILE FIBERS ARE DIVIDED INTO NATURAL AND
a) vegetable;
b) mineral;
c) chemical.
SHARP THREAD WHEN STEPPED:
a) changes its length;
b) does not change its length.
THE PROCESS OF OBTAINING FABRIC FROM THREADS BY WEAVING THEM IS CALLED:
a) spinning;
b) weaving;
c) finishing.
THE PATTERN ON THE FABRIC IS WEAKLY VISIBLE
a) with a printed design;
b) pile.
WHAT ARE RAW MATERIALS FOR FABRIC PRODUCTION
a) cotton wool;
b) yarn;
c) trust.
AT THE EDGES OF THE FABRIC DURING ITS MANUFACTURE, THERE ARE FORMED
a) fringe;
b) border;
c) edges.
FIGURE MEASUREMENT RESULTS ARE NOT DIVIDED IN HALVES
a) length measurements;
b) width measurements;
c) girth measurements.
WHAT CAN CHANGE USING SIMULATION
a) product size;
b) product style;
c) color of the product.
MEASUREMENT SAT IS TAKEN:
a) to determine the length of the belt;
b) to determine the length of the product;
c) to determine the width of the product.
FOR THE GROWTH OF BONES AND TEETH, THE BODY NEEDS A MICROELEMENT
a) iodine;
b) potassium;
c) calcium;
d) magnesium
DOES NOT APPLY TO THERMAL TREATMENT OF PRODUCTS
a) cooking;
b) drying;
c) frying.
AN ELECTRIC APPLIANCE FOR Toasting OR DRYING SLICES OF BREAD IS CALLED
a) deep fryer;
b) mixer;
c) toaster.
CUTLERY DOES NOT APPLY TO:
a) spoon;
b) colander;
c) fork;
d) knife.
THE DURATION OF COOKING EGGS “IN A BAG” IS:
a) 2 minutes
b) 4-5 minutes
c) 8-10 minutes
WHEN OPERATING AN ELECTRICALLY DRIVEN SEWING MACHINE, FIRST YOU SHOULD CHECK
a) integrity of the power cord;
b) the correctness of the material chosen for the work;
c) availability of material;
d) presence of backlight
CONNECTING JOINTS DO NOT APPLY TO:
a) stationary;
b) adjustment;
c) invoice;
d) hem with a closed cut.
THE WORKING TOOL OF THE SEWING MACHINE IS
a) knitting needle;
b) needle;
c) hoop.
THE ENDS OF THE LINES ON THE SEWING MACHINE ARE SECURED
a) double reverse stitching;
b) a knot;
c) a loop.
THE EMBROIDERY DESIGN IS TRANSLATED ONTO FABRIC USING
a) felt-tip pen;
b) copy stitches;
c) carbon paper.
AN IMPORTANT ASPECT WHEN MANUFACTURING PRODUCTS FROM FLAP IS
a) color scheme;
b) price of fabric;
c) product size.
THE THREAD USED IN EMBROIDERY IS CALLED
a) nylon;
b) floss;
c) nylon.
Fill in the missing word MEASUREMENTS ARE TAKEN FROM THE _______________ SIDE OF THE FIGURE.
INDICATING IN NUMBERS THE SEQUENCE OF PRIMARY PROCESSING OF VEGETABLES:
a) cleaning;
b) washing;
c) slicing;
d) washing;
d) sorting.
Answers FOR TEST TASKS OF THE SCHOOL STAGE OF THE ALL-RUSSIAN OLYMPIAD FOR SCHOOLCHILDREN IN TECHNOLOGY “CULTURE OF HOME AND DECORATIVE AND APPLIED ARTS” 6th grade
For each correct answer, the participant receives one point. If the answer is completed incorrectly or only partially - zero points. You should not give half a mark for an answer that is half completed.
The wording of free answers to test questions and assignments does not have to exactly match the answer attached to the assignment. Here, the correctness of the answer should be assessed by its general meaning and by keywords.
1 | G |
2 | G |
3 | IN |
4 | B |
5 | B |
6 | A |
7 | A |
8 | G |
9 | A |
10 | B |
11 | IN |
12 | IN |
13 | B |
14 | IN |
15 | B |
16 | B |
17 | A |
18 | G |
19 | B |
20 | A |
21 | IN |
22 | A |
23 | B |
24 | RIGHT |
25 | 1 – d, 2 – b, 3 – a, 4 – d, 5 – c. |
PRACTICAL TASK FOR THE SCHOOL STAGE OF THE ALL-RUSSIAN OLYMPIAD FOR SCHOOLCHILDREN IN TECHNOLOGY “CULTURE OF HOME AND DECORATIVE AND APPLIED ARTS” 6th grade
Exercise: make make a decorative napkin.
Source materials– plain-dyed cotton fabric, floss threads in two or three colors, copy paper, pencil:
Cut sizes: main part (1 piece) - 15 x 15 cm.
Tools and equipment: embroidery needle, pins, scissors, iron.
Map of operational control of practical work "Making a decorative napkin"
No. | Technological operations | Points |
1. | Proper organization of the workplace | 1 |
2. | The quality of transferring the design to the fabric | 3 |
3. | Quality of embroidery | 5 |
4. | Same stitch length | 3 |
5. | Seam compliance with the specified | 5 |
6. | Color solution | 3 |
7. | WTO quality | 3 |
8 | Compliance with safety regulations | 2 |
Total | 25 |
Literature
- Technology: Maintenance labor. Tests. 5-7 grades / Markutskaya S.E. – M.: Publishing house “Exam”, 2006. – 128 p. (Series “Training and Methodological Kit”)
- Khotuntsev Yu.L., Kozhina O.A. Methodological recommendations for developing tasks for the school and municipal stages of the All-Russian Olympiad for schoolchildren in technology in the 2010/2011 academic year.